CPP
KONWERT Sp. z o.o.
ul. Gen. Grota-Roweckiego 130
41-200 Sosnowiec
(at FBT MILMET S.A.)
NON-REACTIVE 10-1 and 19-7
Prevail Torque Precoating.
Key properties precote® 10-1
Non-reactive, film-forming polyamide dispersion for coating threaded parts. It is a physiologically harmless precoating for immediate locking and sealing of cylindrical and conical threads. The dried film is tack-free and dry to the touch.
Key Properties:
- Forms a dry to the touch and tack-free film.
- Locking, fixing and sealing immediately after assembly.
- Reusable.
- Is physiologically harmless in liquid and coated condition.
- Threaded parts can be preapplied long time before assembly.
- Thread friction values are not altered.
- Avoids corrosion in the threaded connection.
- Can be applied on all threaded metal materials.
- Good chemical resistance.
- Values according DIN 267 part 28.
Main applications:
- On threaded parts (cylindrical/cylindrical and cylindrical/conical combinations) like screws, studs, plugs and pipe threads for locking and fixing as well as sealing against gases and liquids.
- A special formulation makes it possible to get a more time reusability.
Technical data precote® 10-1
| Color | Green |
| Thread friction value µthread |
0,14 - 0,18 |
| Initial installation torque on M10x1.5* depending on coating thickness |
8 - 15 Nm |
| Sealing effect | |
| Straight / straight | < 15 bar (216 psi) |
| Taper / straight | > 50 bar (720 psi) |
| Chemical resistance | |
| Air | -50°C to +180°C |
| Motor oil | +150°C |
| Gear oil | +150°C |
| Glycol / water 50/50 | +120°C |
| Tape water | +100°C |
| Brake fluid | +150°C |
| Fuel | room temperature |
| Diesel | room temperature |
| Shelf-life (melted) | unlimited at room-temperature 27/65 DIN 50014 |
| *All values apply to screws M10 ISO 4017-8.8 plain finish. and nuts M10 ISO 4032-10 plain finish comply with DIN 267, part 28 |
|
Key properties precote® 19-7
Non-reactive, film-forming resin solution with organic solids for coating threaded parts. It is a physiologically harmless precoating for immediate locking/fixing and sealing of cylindrical and conical threads. The dried film is tack-free and dry to the touch.
- Forms a dry to the touch and tack-free film.
- Locking, fixing and sealing immediately after assembly.
- Contingent reusable.
- Physiologically harmless in liquid and coated condition.
- Threaded parts can be preapplied long time before assembly.
- Thread friction values are not altered.
- Avoids corrosion in the threaded connection.
- Can be applied on all threaded materials (with plastic an compatibility test is required).
- Good chemical resistance.
Main applications:
- On threaded parts (cylindrical/cylindrical and cylindrical/conical combinations) like screws, studs, plugs and pipe threads for locking and fixing as well as sealing against gases and liquids.
- The coating is designed for set- and justify screws.
Technical data precote® 19-7
| Color | Colourless/yellow/burnt red (as requested) |
| Thread friction value µthread |
0,1 - 0,15 |
| Initial installation torque on M10x1.5* depending on coating thickness |
6 - 11 Nm |
| Sealing effect | |
| Taper / straight | < 50 bar (720 psi) |
| Solid content | 56% + 5% |
| Chemical resistance | |
| Air | -50°C to +150°C |
| Motor oil | |
| Gear oil | |
| Glycol / water 50/50 | |
| Tape water | |
| Brake fluid | |
| Diesel | |
| Shelf-life | 4 years at room-temperature (RT) 27/65 DIN 50014 |
| * All values apply to screws M10 ISO 4017-8.8 plain finish. and nuts M10 ISO 4032-10 plain finish |
|